PRODUCT DATA SHEET

The 425 series of water soluble fluxes were developed to eliminate the problems of odor, spattering, excess fumes and surface penetration caused by typical glycol bearing water soluble fluxes.  These fluxes are formulated with a variety of activator systems to fulfill all soldering requirements, including products that contain surface mounted components. Because of their unique chemistry, all 425 series fluxes can be processed at lower preheat temperatures.

425-SP is a fully halogenated flux to solder the most difficult boards and surfaces.  Can be washed with warm water or preferably with the aid of an alkaline neutralizer like our 600A aqueous cleaner.

425-RX is both halogenated and organic acid activated.  The 425-RX can be cleaned with cold water without leaving residues even on the most demanding solder resists. 

   PHYSICAL PROPERTIES

425-RX

425-SP

   Appearance

light amber liquid

light amber liquid

   Specific gravity @ 20° C

0.861

0.857

   Flash Point

62ºF

62ºF

   Solids

23 %

18%

   Activator

Halide & OA

Halide

   Recommended thinner

425-00

425-00

SAFETY      

425 series fluxes are red label flammable materials. Avoid exposure to heat, sparks and open flames.  Material Safety Data Sheet available upon request

PACKAGING

Available in 1 gallon jugs, 5 gallon pails and 55 gallon drums

STORAGE    

425 series fluxes have a shelf-life of 12 months when stored in the original sealed container at ambient temperatures.

The information contained herein is offered free of charge for use by technically qualified personnel at their discretion and risk. All information and recommendations contained herein are based on test and data which we believe to be reliable, but the accuracy or completeness is not guaranteed and no warranty of any kind is made with respect hereto.

When Quality counts you can count on Interflux USA

                  Copyright©2001-2002 Interflux USA, Inc. All Rights Reserved                        Back to top

Last updated: February 11, 2008.