PRODUCT DATA SHEET

Acrypeel 2000 is a peelable acrylic masking material, simple in application and fast drying.  Resistant to acidic chemicals (soldering fluxes) and alkaline chemicals (cleaning agents).  Can be used in both conformal coating and wave soldering applications.  Resists temperatures up to 270ºC (520ºF) without loosing its characteristics.  the mask removes easy after processing and the boards or surface is residue free after removal. 

ADVANTAGES

  Easy application                                       Heat resistant

  Short drying time                                     Excellent tensile strength

  Good adhesion                                         Easy removal

  Covered area is air tight sealed                 Resists a wide range of chemicals

   Appearance

White viscous gel

   Viscosity

20,000 cp.

   Solids

70%

   Drying time

   A

   B

   room temp

30 min.         

60 min

A Normal Application

   140ºF

10 min.

30 min

B  Heavy Application

   160ºF

8 min.

25 min

   180ºF

6 min.

20 min

SAFETY: Material Safety Data Sheet available upon request

PACKAGING: 8 Fl. oz. dispensing bottle and 1 gallon jugs.

STORAGE: Shelf life of 18 months when stored in original closed container at ambient temperatures. (Keep from freezing)

The information contained herein is offered free of charge for use by technically qualified personnel at their discretion and risk. All information and recommendations contained herein are based on test and data which we believe to be reliable, but the accuracy or completeness is not guaranteed and no warranty of any kind is made with respect hereto.

"Our commitment to quality and customer service is our most valuable asset"

                             Copyright© Interflux USA, Inc. All Right Reserved                       Back to top

Last updated: October 15, 2010.